Recent content by phoenix70

I have a scale, which transmits up to 19,200, N8, 1, I connect to the PICAXE 20x2, at 9600, I want to repeat this information in another display, and print, header, and footer, and other things. Everything works fine, but apparently the instruction SERIN, SERRX create a delay to execute, and...

hello friends, greetings from Venezuela, excuse my English, the problem is this, I need to repeat in 7-segment displays, the weight of different types of scales, these are reported continuously, displays need to be small, or 5 " to another type. I elected for the PICAXE 20x2, from there take...

Buens nights, friends, forgive my English, greetings from Venezuela, I'm testing the 20x2, with a DS1307, but I doubt, with the Wizard brings the Software does not load, but with the 18x, if you do, I used the converter X2 and neither, I have doubts about which command to use, the i2cslave and...

Hola amigos, saludos, no tengo problemas para imprimir hacia una ipresora serial, pero como deberia manejar las salidas paa una impresora puerto paralelo ?, tipo centronics, alguien me puede dar un ejemplo o algun link ?, eh buscado por san google, pero nada concreto, se los sabria agradecer...

I have a diseno that a computer works with balances via rs232 and, my card receives data of the balance continuously, sends it to the computer and this it responds to the card, my problem is: 1) the following one: if the balance lets trasmitir by any motive picaxe 18x, it stops (because the...

Hello friends, them story I have a program in picaxe 18x, that reads the information of a scale via RS232, the program activates several relays, according to the weight and the product, in another card I show to the name of the product in a LCD, good, this picaxe communicates with a PC to 30 mts...

Hola amigos, disculpen el espanol, pero no hay ninguna forma de poner a funcionar el DS18S20, con el picaxe, es que en mi pais (Venezuela), me es imposible conseguirlo

Buenos dias, hola muchachos, tengo entendido que el picaxe no posee un pic para determiniar el Vref en las AN0...AN4, para las conversiones A/D de 8 y 10Bits, esto es cierto ?, aun en las nuevas versiones tampoco las tienes, algunos pic como el 16F876 traen este pin de referencia, les sabre...

Hola amigos, picaxe, en mi pais venezuela, no consigo algun distribuidor que me venda el DS18B20, solo consigo el DS18S20 y el DS1621, el picaxe trabajaria con esos sensores los reconoceria ?, o tengo que realizar alguna modificacion ?, o simplemente no sirve con ninguno, es para usar la...

Hello friends, I have the following problem, my program works perfect, but in some badges you me reset it the pic, when I to connect the entrance of a device RS232, it is of a scale, I have designed several times this circuit without problems, not you that it can be happening, the serial exit...

Hello, guys, I need know if the new picaxe 28x2, 40x2, supported float point or function trigonometric or variables long, that the Basic ATOM the support, and have more memory or I am Wrong ? please tell me I need float point in my proyects

Hello Friends Picaxe, once but I need of their help in the forum, have I designed two modules with Picaxe 18X, and Soon with 28X or 40X, does the first one read a scale for the serial port, does read a ds1307, and a memory 24LC64, does each one of the heavy ones record, and this send them serial...

I have a board with a DS1307, Picaxe 18X, 28X, 24LC64, but I need save the memory on firts in the board, to save the name, operator, phones, address, etc, and the picaxe save others data internally, if I like change this data, I need save without take out the chip 24LC04, any idea ?, I not can...

Hi friends, I need divide a number w1 with w2 the mantisa is (9999.99) or (9999.9) or (99.999) or (999.99) the problem is that the number is too large to (16 bit) I separe in byte (9999.99) and work (b1,b2,b3,".",b4,b8) for example with (b5,b2,b6,".",b7,b9) is much more...

Hello Friends Picaxe, once but I need of their help in the forum, have I designed two modules with Picaxe 18X, and Soon with 28X or 40X, does the first one read a scale for the serial port, does read a ds1307, and a memory 24LC64, does each one of the heavy ones record, and this send them serial...