Hi All !
I have a steering wheel with force feedback I bought for some testing.
it has a medium size motor and a pot at the center.
Yes!!, I have tap into the pot.. Attached it to the 18X1 and was able to get some LED to light up at a defined reading from the pot as I turn the wheel to either direction.
I also noticed that the motor has only 2 leads, red and black and they go back to the controller. I got some readings from these 2 leads, when the wheel is turned all the way to the right its 37.6 Volts and to the Left -12.3 Volts.
is this PWM ????
Can I connect it straight to my MD03 H-bridge?
Thanks for your help !!
I have a steering wheel with force feedback I bought for some testing.
it has a medium size motor and a pot at the center.
Yes!!, I have tap into the pot.. Attached it to the 18X1 and was able to get some LED to light up at a defined reading from the pot as I turn the wheel to either direction.
I also noticed that the motor has only 2 leads, red and black and they go back to the controller. I got some readings from these 2 leads, when the wheel is turned all the way to the right its 37.6 Volts and to the Left -12.3 Volts.
is this PWM ????
Can I connect it straight to my MD03 H-bridge?
Thanks for your help !!