I bought a Picaxe 18 tutorial board, some months ago, just started using it.
Mine has the older Picaxe18 chip installed.
On the tutorial board are 3 push switches, 1 LDR and a 7 segment LED display.
I've just checked through the PDF manual but cannot find which pins of the
Picaxe18 connect to which hardware.
I had a look at the pdf file:
http://www.picaxe.com/docs/axe050.pdf
Which does list LDR is connected to pin 2 permanently, but did not see where
switches are connected.
I can get a magnifying glass and phsically trace the PCB tracks, but is there
a schematic anywhere (online or pdf file) that would make this easier.
Sorry if I missed this, thanks in advance.
Mine has the older Picaxe18 chip installed.
On the tutorial board are 3 push switches, 1 LDR and a 7 segment LED display.
I've just checked through the PDF manual but cannot find which pins of the
Picaxe18 connect to which hardware.
I had a look at the pdf file:
http://www.picaxe.com/docs/axe050.pdf
Which does list LDR is connected to pin 2 permanently, but did not see where
switches are connected.
I can get a magnifying glass and phsically trace the PCB tracks, but is there
a schematic anywhere (online or pdf file) that would make this easier.
Sorry if I missed this, thanks in advance.