Recent content by haexapodim

the basic programm: the c# one :

hi, this my robot : and this is a copy of the form wich can control each motor of the left arm: the picaxe program and the c# one are jointed in the folowing message The problem : when i start my form i check the check box leaded to the hand and when i move the track bar it's working...

hi, with the help of some of you i have built this form : whith it you can drive servo by increment, by typing the degree value, by cliking on the seromoteur button (make the servo do one rotation) by scrolling the track bar And it's for the track bar that i have a problem (the servo don't...

it looks like this And here, two programms tested whith picaxe the first one work the second bot so the picaxe can detect the "0" information it can detect that an information is not a zero but it doesn't recognize the "1" information

Hello I'm trying to creat a winform (in c#) which can swich on/off a del via the serial port this is the form and the c# program

Comme indiqué dans le code un clique sur le bouton allumer met "1"dans le buffer

bonjour je tente de réaliser une appli toute simple consistant à allumer et éteindre une diode depuis un winform sous c# voila à quoi ressemble la fenetre les 2 premiers boutons ouvrent et ferment les ports les deux autres envoient 0 ou 1

should i put the 4700 capacitor like in this diagramm? I don't have multimeter to check the tension but i will try tomorow at work

this the power supply :

Ok the diagramm isin the attachements and here the program: ; ******************************* ; ***** Sample Header File ***** ; ******************************* ; Filename: ; Date: ; File Version: ; Written by: ; Function: ; Last Revision: ; Target PICAXE: ...

Hello, I have built a bipedal robot Each leg is powered with two Hs 755 mg For this systeme i'm using a 20 m2 and the power supply is a laboratory one which delivers 9v and 1.5 A During the first 15 seconds all is working but after a very short time servomotors have less and less power and...

voici qq photos

bonjour, J'ai réalisé un chassis de robot bipede dont chaque jambe est mue grace à deux Hs 755 MG l'electronique pour l'insant est très simple : un 20 m2 dont 4 sorties pilotent les 4 servos une alim de labo 7.5v-9v sous 1.5 A LE PROBLEME EST LE SUIVANT : A la mise sous tension et durant les...

Bonjour, pouvez vous m'expliquez pourquoi le programme ci-dessous fonctionne et permet de visualiser l'incrémentation de la variable main: bptr = 4 for b0 = 1 to 20 write @bptr,b0 pause 500 read @bptr,b1 serout 1,N2400,(#b1,13,10) pause 500 bptr = bptr +1 pause 1000 next b0 goto main...

nothing appears :