Try this
Start with some cells
First pull in a new command
Then copy/paste a second
Group some of the previous commands and move them
That will result in a paste of the recent copy
When doing an undo I've had three different results
Sometimes the undo does what it should but sometimes also...
I think there's a print error in the manuals regarding pulsout command
From manual page 19:
"The time is in 10ms intervals, but for easier reading, the text area in the command converts this to milliseconds as the time is entered into the command."
Manual 2 page 4 says 10 micro s (seems to be...
It's alive......:cool:
Connected the legs with solder and that did it.
Dont know why it caused a problem because the download circuit shows there is an internal connection between them and tech support said the board itself should connect them as well.
Anyhow, now the fun can begin :D
Thanks...
Could need some help here
Have a PICAXE 14M starter pack but cannot connect to it.
Using a AXE027 USB cable, checked the cable with the troubble shooter and it seems to be ok
Drivers downloaded and installed without errors (did it twice with uninstall between)
Power supply is 3x AA...
Hi
Almost new to PIC, programming and electronics so some questions might sound odd to you
I'm working with flowcharts in 6.0.6.2 and have some questions about the interface
1. Is it possible to give the variables other names (have seen the basic code using symbol....) in the flowchart?
2...