Wrong presentation of memory values during simulation

[sierra_uniform]

I have a program using eeprom to put values into the picaxe memory. When I start the simulation memory values are shown as you can see in the attached jpg file. The program downloaded to the PICAXE works very well. All values in the memory are o.k. I can check this via serial communication to read and write the memory. What could be the problem?

 

[nick12ab]

I've tried your code and what you've shown doesn't happen.

What version of Programming Editor are you using? If you're using an old version, it may have been a flaw that was fixed in a later version in which case get the latest version

 

[sierra_uniform]

I used V 5.4.3. After download and installation of V 5.5.0 all is o.k. Thank you for your allusion to the latest version.