Hi,
I have a stepper motor from rs spares which I cant get to turn:
http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=3514647
I have searched all over the forums but have had no luck, the code I have been using is:
' RED +5V
' GREEN +5V
' YELLOW output7
' ORANGE output6
' BROWN output5
' BLACK output4
main:
let pins = %11000000
pause 10
let pins = %01010000
pause 10
let pins = %00110000
pause 10
let pins = %10100000
pause 10
goto main
I changed the wires for what I understand are my wires from the pdf diagram for the stepper motor. When the program is the motor just vibrates? ?
The stepper motor is driven by a 18x power board with L293D driver and 18x chip with 6v input, in the 18 pin board manual it states that the power drops 1.5v would this have anything to do with the stepper not turning?
Any help is much appriciated
I have a stepper motor from rs spares which I cant get to turn:
http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=3514647
I have searched all over the forums but have had no luck, the code I have been using is:
' RED +5V
' GREEN +5V
' YELLOW output7
' ORANGE output6
' BROWN output5
' BLACK output4
main:
let pins = %11000000
pause 10
let pins = %01010000
pause 10
let pins = %00110000
pause 10
let pins = %10100000
pause 10
goto main
I changed the wires for what I understand are my wires from the pdf diagram for the stepper motor. When the program is the motor just vibrates? ?
The stepper motor is driven by a 18x power board with L293D driver and 18x chip with 6v input, in the 18 pin board manual it states that the power drops 1.5v would this have anything to do with the stepper not turning?
Any help is much appriciated
Attachments
-
135.9 KB Views: 20
-
30.7 KB Views: 17