hi members. am endeavering to put together a workable r/f remote controller for operating model ships. have had some success using "hope - rxd1 and txd1 rf modules with tone data input. would like to interface with a "picaxe microcontroller to get a two or three channel operation. a practical schematic giving interface connect up would be very helpful. --- thanks--- jim
rf. remote controller
- Thread starter aranui
- Start date
hippy
Ex-Staff (retired)
Welcome to the PICAXE forum.
Some members are users and advocates of Hope RF modules and will likely be along shortly to offer their advice. In the meantime Forum Search ( see top link bar on this page ) will help you find earlier discussions on Hope modules and RF modules in general.
Some members are users and advocates of Hope RF modules and will likely be along shortly to offer their advice. In the meantime Forum Search ( see top link bar on this page ) will help you find earlier discussions on Hope modules and RF modules in general.