steve74192
New Member
I have been using v5.5.6 of the programmer for a while now
and as i have purchased a Oled AXE134Y recently i also decided
to update my programmer to the new v6.0.8.3.
When i tried to run a simulation of some code i have been using for about 3 years
now it suddenly has a syntax error which has never shown before in
any earlier versions.
Could this just be a bug in the new software or is it i was just lucky
to get away with it in past versions.
I am using a CHI035A High power board with L293D and a 18m2 which is running a stepper motor.
The line i have a problem with is "let pins = b2"
setfreq m32
let dirsb = %11110000
pause 1000
for w2 = 0 to 600
pause 6
gosub lstep2
next w2
end
lstep2: let b1 = b1 + 1
goto mystep2
mystep2:
let b1 = b1 & 7
lookup b1,(%10100000,%10000000,%10010000,%00010000,%01010000,%01000000,%01100000,%00100000),b2
let pins = b2
return
Thanks
Steve
and as i have purchased a Oled AXE134Y recently i also decided
to update my programmer to the new v6.0.8.3.
When i tried to run a simulation of some code i have been using for about 3 years
now it suddenly has a syntax error which has never shown before in
any earlier versions.
Could this just be a bug in the new software or is it i was just lucky
to get away with it in past versions.
I am using a CHI035A High power board with L293D and a 18m2 which is running a stepper motor.
The line i have a problem with is "let pins = b2"
setfreq m32
let dirsb = %11110000
pause 1000
for w2 = 0 to 600
pause 6
gosub lstep2
next w2
end
lstep2: let b1 = b1 + 1
goto mystep2
mystep2:
let b1 = b1 & 7
lookup b1,(%10100000,%10000000,%10010000,%00010000,%01010000,%01000000,%01100000,%00100000),b2
let pins = b2
return
Thanks
Steve