pauseus

[elwero]

I have the Picaxe programming editor 5.2.4 and picaxe mode 18X. I want to use the pauseus instrucción but the compiler don´t rocognize it... someone knows why? sorry for my english, I speak spanish...

 

[sghioto]

That command is not valid for the 18X, see manual two ( basic commands ).

Steve G.

 

[westaust55]

elwero,

Firstly welcome to the PICAXE forum.

To make life really easy for you, as Steve says, read Manual 2 (currently Rev 6.9) page 126 and you will see the PICAXE icons at the left side of the pages. These icons show that the command is only for the X1 and X2 chips

 

[Andrew Cowan]

Look into the pulsout command - that waits a very short time.

A

 

[westaust55]

pauseus - pulsout as an alternative

Look into the pulsout command - that waits a very short time.

A

Good potential solution Andrew. Has exactly the same interval and time range.

Likely will be slightly less accurate and must have a spare output pin to allocate or than can be dual use.

 

[elwero]

Thanks a lot... problem solved