Hi all, I'm using the latest programming editor v5.2.5. I followed the tutorial code which set high 4 and low 4 each time for PICAXE-08M. However, whenever I tried to download the program to the chip, it keeps saying Hardware not found on Com 1. I tried all the suggestions given but it is no use. I even tried to update firmware and it gave the same error.
I did have a successful attempt yesterday and it was the same method. But now, it cannot work again and I cant get the program downloaded to the chip!
By the way, I am using PICAXE 08 proto board which uses serial cable. I tested it using a multi meter and it is ok, I also tried to test my COM 1.
It should still work somehow after downloading less than 100 times.
Please help.
I did have a successful attempt yesterday and it was the same method. But now, it cannot work again and I cant get the program downloaded to the chip!
By the way, I am using PICAXE 08 proto board which uses serial cable. I tested it using a multi meter and it is ok, I also tried to test my COM 1.
It should still work somehow after downloading less than 100 times.
Please help.