Hey everyone,
I'm here to bog up the forums with another USB problem. I searched, and looked through a number of threads, but I do not see anyone else having this issue.
First of all, I have attached a screenshot of the error I am getting.
So I have followed the instructions implicitly on installing the USB drivers.
Here is a rundown of what I have done:
I'm here to bog up the forums with another USB problem. I searched, and looked through a number of threads, but I do not see anyone else having this issue.
First of all, I have attached a screenshot of the error I am getting.
So I have followed the instructions implicitly on installing the USB drivers.
Here is a rundown of what I have done:
Thanks in advance for any help you can offer.Plugged 4 AA batteries into my PICAXE 28X. (Because 3 AA's did not come above 3.5V when it is stated in the manual to have 4-5V)
Plugged my USB cord into the PICAXE then into my PC, and noted which port it was inserted into.
Installed the programming editors.
Installed both AXE027 drivers from the PICAXE cd that came with in my package. I chose the drivers from cd:/USB_Drivers_AXE027/XP-2000-VISTA
Opened the PICAXE Programming Editor.
Hit F5 to upload the 'code' (blank page) to the PIC chip.
That is when I got the error in the screenshot below.
I tryed the solution presented, resetting the device, but to no avail. I also switched COM ports as suggested in the manual.
Attachments
-
27.7 KB Views: 29