Hi all, wondering if anyone else has ever had problems with their 14m and the debug command. Mine refuses to pass any values back to the PC. Yes, I've checked the cable etc - that's fine. No problems with my 08M, 18X, 28X, 28X1, 40X, 20M I've used.
My test code:
loopy:
readadc 4,b0
debug
pause 500
goto loopy
The debug window appears, but no values get displayed - it just says 'waiting'. There is a varying 0 - 5V signal appearing at ADC4 of the 14M.
Interestingly, if I use sertxd to extract data, I get this:
sertxd (">>> ",#b0,13,10)
xx 145
xx 231
xx 191
where xx is some weird ascii character like a German umlaut over an e. Bizarre. If you change the >>> to say CCC,you might get a different weird character again. I have the baud set at 4800, which displays everything (apart from this) nicely, including the CR and LF.
My test code:
loopy:
readadc 4,b0
debug
pause 500
goto loopy
The debug window appears, but no values get displayed - it just says 'waiting'. There is a varying 0 - 5V signal appearing at ADC4 of the 14M.
Interestingly, if I use sertxd to extract data, I get this:
sertxd (">>> ",#b0,13,10)
xx 145
xx 231
xx 191
where xx is some weird ascii character like a German umlaut over an e. Bizarre. If you change the >>> to say CCC,you might get a different weird character again. I have the baud set at 4800, which displays everything (apart from this) nicely, including the CR and LF.