Search results

Here is my full program, it stops in simulation ' Program to convert analog inputs A1 to A8 to digital values and control a stepper motor ' Written in PICAXE Basic Hallo, I am looking for a solution, from this line the simulator from the picaxe editor is going stuch on this line: readadc10 5...

Hi, I have the below code that works for increasing the frequency on c.2 output pin gradualy. And i am proud that it works. but as it is a simple calculation, I wonder is there is a formula based on the frequency. duty pitch frequency constant pwmout...

@Erco, Your post http://www.picaxeforum.co.uk/showthread.php?30093-Steering-a-dolly-by-means-of-a-black-line-lt&p=312320&viewfull=1#post312320 g-ave me alot of info. Thank you for that. to erco et all I have made a line following platform so that I can place a camera tripod on it. The camera...

Hi, I am a little desperate. I a here is the Hardware. It is The steering part that bugs me. I made a triangular 3 wheel Line following dolly (90cm X 120cm) and the front wheel is the steering wheel. It is belt driven from a stepper motor via a belt in full step mode. The stepper needs to do...

Hi all, I would be pleased to use a "picaxe proto shield library for eaglecad" Would there be one around and where? Thanks, Willy

Hippy & Alistairsam I am using the folowing pogram from post #56 on page http://www.picaxeforum.co.uk/showthread.php?15591-stepper-control-with-acceleration-and-variable-freq-square-wave-output/page6 I tryed to figure out how i could set the max speed of the steppermotor? But did not...

Dear All, Sorry, I forgot hos to input code, can someone please remind me? How is IRin and IRout really works? I see the program for IROUT: in the command pdf. [ for b1 = 1 to 10 irout B.1,1,5 pause 45 next b1] The above is running in a "for next" loop and then pause...

Dear ones who helped me before. I need to make a litle moviclip of something that is hard to do out of hand. I need to do 3 clips +- exactly the same track so that it can be set on top of each other to form the endresult Therefore I toaught of a linefolowing carage whereon the trypod with a...

Hi, I Have purchased a "zs 042" module (based on a ds3231). I need a secondpulse ou or a minute pulse out. Is there someone that knows a method of doing this a simple as posible. I need the second puls at pin c.4 of a picaxe 14m2. Thank you Willy

Hi, I am testing the pwmout and the pulsout command. The pulse from the picaxe 14m2 is send to the controller of a steppermotor. The pwmout is stepping the motor perfect, but the pulsout command is not letting the motor step. I send the output pulse to the same pinB.2. I am pulling my hear, why...

Dear all, I have a 48V battery with a battery charger. The battery charger has an internal fan that continues turning after the battery is fully charged. I am looking for a system to switch the power off after my battery is full. Now between the power outlet and the charger I have a KWH...

Hi, I need to feed a pulse stream to a stepper motor controller. But I need to make the pwm frequency variable with a potentiometer at an analog input on the 08m2 picaxe. I am searching the net and this forum, and I am continuously finding to change the duty cycle. But as I said, I need the...

Dear all, Im in great need of help, and i know that on this forum are great knoleged people. This is what I need: Input is always the net-frequency (50Hz) on an "ST" or "TTL if possible" input pin on a 14m2 picaxe. I need an output frequency that is in direct calculated relation with the...

Dear Experts, I am working on an old clock of 1.5m diameter. Only the existing "divide by 12" gears are still intact. So I need to drive the minute hand to get it working. I am doing this with a stepper motor and after al the reductions and belts, I need 2000pulse on the stepper controller to...

Dear Sir's, I have a broken picaxe in a light controlling board. I also have a working replacement picaxe. Now this is 2 years old and I lost the program because of a computer crash about an hour after I uploaded the program in the picaxe. Is there a way to recuperate the program from the...

Dear All, I need a Low frequency of between 25 and 100Hz pwm out of a picaxe 28x. Normaly it can only give 4000Hz and up from the PWM outputs. 1: Is there a way to get this done without external divider components? 2: how can I collect the pwm signal inside the 28x, so that I can calculate...

Hay, I need for my design 2 different power supplies. The usual one is ok for the picaxe. But for the power mosfets I need an extra 24 volt supply. I am looking for this in the forums and in the tutorials, but no luck. How can I do this in "Isis for picaxe VSM" Willy

I think I have to address this to Technical? This massage window on my computer that I am writing this text in is very small to write a descent text. Even in the a 21" screen that I am using. There is a lot of space free on the screen. Maybe is it not possible to make this window a few...

Why is it that I have to register every time that i want to download the full version of the software? (I use the already registered download) I would not mind, but every time the password is send over the internet. I think that there is no need for sending the password anyway becouse everyone...

I have received a picaxe experimenter board and put it together yesterday. With it I ordered two picaxe08 chips allso 2 picaxe18x and 2 picaxe28x. I started testing the board with the picaxe18a that was delivered with the kit and the flikkering led program. That worked well. Then I changed...