Search results

  1. J

    08m2 and AXE033b drifting off frequency with temperature change

    Using the above units together, they work fine as long as the Calibfreq on the 08m2 is set to -15 and the RST pins are briefly reset on the AXE033b. This will work ok for around 10 hours at room temperature and then spurious characters start appearing. If the temperature drops to around 12c then...
  2. J

    DS18B20 erratic readings with 08m2

    I have recently been experimenting with an AXE033 and a DS18B20 using an 08m displaying the temperature with great success. Recently I have loaded the same program into an 08M2 and experienced very erratic temperature readings on the lcd display and the display is not uploaded as it used to be...
  3. J

    08m code not simulating when set to 08m2

    Firstly congrats on the superb -M2 range of Picaxes, Especially the 08M2 which is now so capable and versatile. I have been running some code in the real world in an 08M for several months now. This code works and simulates perfectly with the latest version of PE (5.4.0) However when the...
  4. J

    ProEdit with WIN95?

    Should Programme Editor (any version) run with WIN95. When I try to install the latest version it loads but when opening the program it states "Run Time Error 50003' unexpexted error, then stops Any Ideas what is wrong.
Top