Recent content by Scheibuman

Yes, I see, all works fine. Thank you very much for your support.

I think we might be talking past each other. I have already understood how pulsein works. It's extremely faster than, for example, the count command, because the pulsein command measures the time between the 2 edges and calculates the pulse from it. That's even ingenious, which is why I use the...

Tank you very much for your example code. All input will help a newbie like me. I understand what you want to convey. However, in your code, there are a few issues: 1. there is no time-critical query (a button must be able to trigger an action at any point in the program without delay), and 2...

@picit The entire program is still under development. At the top, it says in the remark "Take2"; there's already a working Take1 and a completed circuit board (cutout in the profile picture) with a 14M2 as SIOC. However, there are always timing issues when querying the buttons. So, I've read a...

Many thanks to all of you for the friendly welcome and your help here in the forum. @AllyCat Yes, I actually briefly thought about working with a 2nd CPU. But no, I think it has to work like this. Is there perhaps an example code here in the forum where a servo pulseout can be used internally...

Thank you very much for your support. I have used the count command in another project. But this also has the disadvantage that the program stands for the time of counting. During the time in which the count command counts, the two buttons are not queried, for example. In order to record the 15...

Hello everyone, My name is Dirk, I'm 50 years old, I'm from Germany and I'm new to the forum. I have been looking for some time for a solution to program microcontrollers that I can understand in order to implement a few small ideas. After some research I came across Matrix - Flowcode, but I...