Recent content by IanH1960

Hi, This might be of interest to existing AHK (Auto Hot Key) users or for any non (or limited) programmers looking to implement programmed serial comms between their PC and PICAXE project. This is to add to the existing serial programming options already desribed in the forum. For info AHK...

Hi, I suspect the answer to this is no.... but can anyone confirm - I'm running 28X2's at 40 MHz and need some serout's at the standard bauds. I currently drop down to setfreq = m8 to get T9600_8 which is the best I can get with the internal 8MHz resonator. Are there any T*_40 serout baud...

Hi, I've been using pulsin on a 28X2 at 40 MHz to read pulse lengths up to about 4 ms in length. When I run settimer at the same time the time base of the pulsin measurement changes. At 40 MHz the pulsin unit of measurement is nominally 1 us, with settimer running it changes to about 2.16us (a...

Hi, In anticipation of receiving some new 28X2's soon I'm looking through the programming changes needed to convert some 28X1 programs. I use hardware serial comms in one at 115200 baud. I would like to run the 28X2 at 32MHz with an external 8 MHz resonator and anticipated that the existing...

Hi, Came across this and it might be of interest - its a USB-TTL converter cable. Can be connected directly to HSerial pins for 115200 baud coms - faster if you can get the chip to do it. I've tested 2-way comms at 115200. http://www.avitresearch.co.uk/usb_to_ttl.htm Neat... please excuse if...