Recent content by andrefcarvalho

I apologize for the time without answering, but due to the situation I could not come here, yes may be what the hippy is referring to, now I have had the device turned off, however maybe a way around the problem would be the truck doing a reset After a while, is it a good option?

'*********************************************************************** ' zona de controlo para painel '*********************************************************************** 'let setpoint = 360'usar em caso do valor na eeprom for absurdo, mais tarde tentar usar comandos...

I have the slightly different code, yesterday I could not get from him, the question I have now is the truck send strange characters to the truck and then block, not doing its function, is normal?

Good afternoon, after some time using the board, I came across some problems in the truck, after some time littered characters start to appear on the lcd and the truck freezes. Will I have something wrong with the code or wasn't it meant to work like this for so long?

value for a toggle in manual, thanks for the help in it, there was no opportunity to come update the topic Last night I was able to get the code working and I already have the truck to do its function, it seemed to be some problem in the output and I changed the pin will work like this until i...

if you use the simulation, it works, in real time the pickup does not assume the values real-time pickup serial with simulation

I'm trying to get the code to read the conditions, after adding a maximum setpoint condition the code doesn't work for me as I want, any solution? SYMBOL tpan = w12'variavel word temperatura de painel SYMBOL tcil = w13'variavel word temperatura de cilindro SYMBOL setpoint =...

other position

support for the lcd made, replacing the place of the temperature in the quadrant

I was not trying to figure it out, so I let some time go by and I got the code again, and I managed to make it work with hippy help, so the characters are still giving me stress to show the values, not yet I know for sure how to get the characters to apply to the "table" (table (0x00, 0x00...

It's an idea, I tried to implement it, but the values are not correct and they are not in their place. https://youtu.be/T1AhkN_EMnQ

code..

Good morning everyone, I've come to ask for your help, once in a project useri a lcd 40x2 using the protocologo i2c, but the form of writing is different from what I'm using, however part of the code is this: '------------------------------------menu pincipal--------------------------------...

Good night I updated the program to novaversão, but still my program I came across a problem that when setting the program to the PICAXE 08M simumlar or make it the syntax error to be referring to the PICAXE 08M and not 08 as it should be, grateful for the attention image: Uploaded with...

Posts merged from other forums / threads and edited to try and make some coherent sense