I have a Vishay IR receiver on a pcb being used with the Picaxe shop remote control, using Irin with Picaxe 20M2. I want to move the pcb to another location and have an arrangement to send Irout by wire to an IR emitter facing the Vishay device.
This would end up as a local IR receiver that I can use my remote on, connected to a cable with an IR emitter facing the pcb mounted Vishay receiver. I was going to do something a while back and seem to think somebody suggested an opto coupler somewhere in the link.. Any suggestions, thanks
Vishay receiver TSOP2240
This would end up as a local IR receiver that I can use my remote on, connected to a cable with an IR emitter facing the pcb mounted Vishay receiver. I was going to do something a while back and seem to think somebody suggested an opto coupler somewhere in the link.. Any suggestions, thanks
Vishay receiver TSOP2240