david miles
Member
Hi All.
I am trying to make a thermometer using a DS18B20, an 08m chip and an AXE033 LCD module.
I have 033 LCD module ( with jumper wire in place ) connected to 08m's power supply ( 4.6volts )
I have tried :-
initause 500
main: serout 0,N2400,(254,128)
serout 0,N2400,("Hello!123")
end
To see if the LCD module will work, but without any luck.
I have LCD "OUT" going to 08m pin 2 and 08m pin 7 going to LCD "IN"
Can 08m chip communicate with 033 LCD module? Anyone any thoughts?
David Miles.
I am trying to make a thermometer using a DS18B20, an 08m chip and an AXE033 LCD module.
I have 033 LCD module ( with jumper wire in place ) connected to 08m's power supply ( 4.6volts )
I have tried :-
initause 500
main: serout 0,N2400,(254,128)
serout 0,N2400,("Hello!123")
end
To see if the LCD module will work, but without any luck.
I have LCD "OUT" going to 08m pin 2 and 08m pin 7 going to LCD "IN"
Can 08m chip communicate with 033 LCD module? Anyone any thoughts?
David Miles.