I can't get working the axe 210 connect. As Hippy says "The first thing to do is get both XBee's configured using the Programming Editor XBee Wizard. Without that it's difficult to say what or where something is wrong." I never get it.
After some probes with the multimeter it seems that the problem lays in the 5V and 3V regulators: for example, the 3 V regulator only shows 2 V.
Then I started "XBEE wireless modules Filed under: PicAXE — profmason.com" but i have two silly questions: Are Tx and Rx in Xbee DOUT and Din according to the datasheet? The second question is that Profmason get the Xbee in the protoboard, I can't get it because the pins don't fit. The Max can but the Xbee not, but in the pictures both of them are in the same protoboard. Any ideas?
After some probes with the multimeter it seems that the problem lays in the 5V and 3V regulators: for example, the 3 V regulator only shows 2 V.
Then I started "XBEE wireless modules Filed under: PicAXE — profmason.com" but i have two silly questions: Are Tx and Rx in Xbee DOUT and Din according to the datasheet? The second question is that Profmason get the Xbee in the protoboard, I can't get it because the pins don't fit. The Max can but the Xbee not, but in the pictures both of them are in the same protoboard. Any ideas?