This has been asked before!

[QuIcK]

But i cant find it.
I would like to use symbols to assign pin values on a 28x2 part

symbol led1_sda = c.0
symbol led1_clk = c.1
symbol led1_cs = c.2
 
b1 = b0 & 1
 
led1_cs = 0
led1_sda = b1
led1_clk = 1
led1_clk = 0
led1_cs = 1

this returns a syntax error. it doesnt have to be on PortC, ive tried pin0.. outpin0..
suggestions? id rather not have to test the bit and do high led1_sda/low led1_sda

 

[eclectic]

@Quick

Try these

symbol led1_sda = PINC.0

symbol led1_clk = PINC.1
symbol led1_cs = PINC.2

symbol red   = PINB.0
symbol green = PINB.1
symbol blue  = PINB.2
 
 
 
b1 = b0 & 1
 
led1_cs = 0
led1_sda = b1
led1_clk = 1
led1_clk = 0
led1_cs = 1
[code]

e

 

[hippy]

You need to use "pin variables" ...

symbol led1_sda = pinc.0
symbol led1_clk = pinc.1
symbol led1_cs = pinc.2