I am having problems reading / storing variables.....
I am using a PICAXE 18X chip and the "official" test PCB from Rev-Ed to read the value of the on board LDR ....so far so good then...
from the attached test program, the 1st time I read the variables they appear to be correct, when I read them again several have changed (notably w0 & b6) but as far as I can see they should not have changed...have attached a txt file showing this
Obviously I have missed something fundamental but cannot see what.
Thanks in advance
I am using a PICAXE 18X chip and the "official" test PCB from Rev-Ed to read the value of the on board LDR ....so far so good then...
from the attached test program, the 1st time I read the variables they appear to be correct, when I read them again several have changed (notably w0 & b6) but as far as I can see they should not have changed...have attached a txt file showing this
Obviously I have missed something fundamental but cannot see what.
Thanks in advance
Attachments
-
6.4 KB Views: 11
-
2.9 KB Views: 9