Hi
Is it possible via the special functions registers to alter the A.0 or A.1 or A.2 or A.3 (pref A.0 and or A.3) to operate
as a HINT such as B.0,B.1 and B.2 (hint0, hint1, hint2) on the 28x2. To detect a serial in recieved.
It is not possible to use the pinsB as these are tided up as a bank of outputs for a
more stream lined layout on the board design. Or is it possible that when dorji DRF1276DM RX recieves a call
the picaxe pin recogises this as such an jumps to serial in.
On the slave I have this function on the 20x2 as using B.0 connected to AUX pin on the dorji
which recieves a call 2ms before RX via the hintsetup command hintsetup %00100010 to detect the rising edge
regards
john
Is it possible via the special functions registers to alter the A.0 or A.1 or A.2 or A.3 (pref A.0 and or A.3) to operate
as a HINT such as B.0,B.1 and B.2 (hint0, hint1, hint2) on the 28x2. To detect a serial in recieved.
It is not possible to use the pinsB as these are tided up as a bank of outputs for a
more stream lined layout on the board design. Or is it possible that when dorji DRF1276DM RX recieves a call
the picaxe pin recogises this as such an jumps to serial in.
On the slave I have this function on the 20x2 as using B.0 connected to AUX pin on the dorji
which recieves a call 2ms before RX via the hintsetup command hintsetup %00100010 to detect the rising edge
regards
john