I have PE 5.2.7 which I have been using for a few years now. And it seems to be working fine. I recently downloaded PE6.0.8.4 to try it out. If I open a short program I can download it to my Picaxe 18x with no problem. However when I open a longer program the Clear button is functional but the Program button is grayed out so I can not download my program to the 18x. I can download that same program fine using PE5 so I don't think there is a problem with the program. Can I just attach those programs so they can be seen or is there a certain procedure for inserting a program file into my post? As you can tell I am new at this forum so any help is greatly appreciated.
Ok I went back and read the "Read me first" and found out how to insert programs into my post.
Short program that will load OK with PE6:
Longer program that will not load with PE6
I hope I did all that right. If I did not please tell me what I did wrong. Thanks again.
Carroll
Ok I went back and read the "Read me first" and found out how to insert programs into my post.
Short program that will load OK with PE6:
Code:
main:
high 1
pause 50
low 1
pause 50
goto main
Code:
Main:
let B1 = 1
gosub out
out:
low 0,1,2,3,4,5
if B1 = 5 then
B1 = 1
Endif
if B1 = 1 then
high 1
Endif
if B1 = 2 then
high 2
Endif
if B1 = 3 then
high 3
Endif
if B1 = 4 then
high 5
Endif
gosub timer
inc B1
goto out
timer:
for B0 = 1 to 60
pause 20000
next B0
return
Carroll
Last edited: