Folks - After having a few dramas with the serin command on 14M V.9A I have received replacements which are V.9B. The serout on normal output pins was ok on the V9.A, but don't seem to work at all on any of the ouput pins of the V9.B. I run the same program on both:
Main:
for b0 = 1 to 255
Pause 1000
Serout 1,n4800_4,(#b0,13,10)
next b0
Goto Main
Has anyone else had this bother or is there something I have missed.
All suggestions welcome.
Hooter
Main:
for b0 = 1 to 255
Pause 1000
Serout 1,n4800_4,(#b0,13,10)
next b0
Goto Main
Has anyone else had this bother or is there something I have missed.
All suggestions welcome.
Hooter