I thought I would share replacement firmware for the Picaxe Analogue Calibration Board.
http://www.picaxe.com/docs/BAS810.pdf
The board came with a very old part the 16c710, well mine did, and it failed this morning.
Replaced the fail part with a 16f1847 (same pinout) and ten minutes later new firmware. Simple compile for your selected part, you do not have to use a 16f1847 as most 20 pin parts would work - I just recompiled and tested a 16f88, and, that part works by only changing the chip specification.
Anyway, for this legacy board. which I use daily. A replacement firmware for the you to enjoy. I have added a feature.... when you power the board the startup ADC value sets the time period between ADC samples.
https://github.com/Anobium/Great-Cow-BASIC-Demonstration-Sources/tree/master/Vendor Boards/Rev-ED UK Revolution
Enjoy,
Evan
http://www.picaxe.com/docs/BAS810.pdf
The board came with a very old part the 16c710, well mine did, and it failed this morning.
Replaced the fail part with a 16f1847 (same pinout) and ten minutes later new firmware. Simple compile for your selected part, you do not have to use a 16f1847 as most 20 pin parts would work - I just recompiled and tested a 16f88, and, that part works by only changing the chip specification.
Anyway, for this legacy board. which I use daily. A replacement firmware for the you to enjoy. I have added a feature.... when you power the board the startup ADC value sets the time period between ADC samples.
https://github.com/Anobium/Great-Cow-BASIC-Demonstration-Sources/tree/master/Vendor Boards/Rev-ED UK Revolution
Enjoy,
Evan