HI' newplumber. Thank you for your attentionHi Ybloch here is schematic I found on the HMC5883L
https://cdn-shop.adafruit.com/datasheets/HMC5883L_3-Axis_Digital_Compass_IC.pdf
Sadly I only understand the first page ..about half way down...and it says the word Honeywell
POST 1 thats cool got a new member "welcome here" from the janitor
Welcome...Hi', how to build simple program for communication with HMC5883L Magnetometer Module ?
Thank"s
Hi' friends. Really i tried all of the options and did not reached good result. Only 255 i have got from all channels.Welcome...
As any 3D magnetometer, you can read some usable values if chip if perfectly horizontal...
If not, this will be very tricky with a Picaxe...
That usually indicates an I2C bus wiring issue or not using the correct I2C Device ID in the HI2CSETUP command. The PICAXE uses an 8-bit Device ID with the lsb set to zero.Hi' friends. Really i tried all of the options and did not reached good result. Only 255 i have got from all channels.