Technoman
Senior Member
Hi,
Would it be possible to automatically set up the right chip at file opening in Blockly? The same if you click on another tab.
(e.g. PE6 is currently set to 20M2, and the newly opened file was written for a 28X2 chip, therefore the setting would change to 28X2 ; a quite common situation within a classroom)
Would it be possible to automatically set up the right chip at file opening in Blockly? The same if you click on another tab.
(e.g. PE6 is currently set to 20M2, and the newly opened file was written for a 28X2 chip, therefore the setting would change to 28X2 ; a quite common situation within a classroom)