Hi Guys
I have taken a screen shot of a basic circuit what I expected to see on the virtual terminal was "abcd" etc but as can be seen from the screen shot its some what different any advice will be appreciated my code is as follows
main:
for b1 = "a" to "z"
serout C.2,N2400,(b1)
pause 500
next b1
goto main
main:
serin C.4,n2400,b1
if b1 = "a" then
high 1
end if
if b1 = "m" then
low 1
end if
goto main
thanks to all
novolts
I have taken a screen shot of a basic circuit what I expected to see on the virtual terminal was "abcd" etc but as can be seen from the screen shot its some what different any advice will be appreciated my code is as follows
main:
for b1 = "a" to "z"
serout C.2,N2400,(b1)
pause 500
next b1
goto main
main:
serin C.4,n2400,b1
if b1 = "a" then
high 1
end if
if b1 = "m" then
low 1
end if
goto main
thanks to all
novolts
Attachments
-
143.1 KB Views: 12