Tune help req

Need some help reproducing a ring tone style prop.
Ive spent may hours trying to reproduce a seemingly simple set of tones to no avail.
Any ideas ?

https://www.youtube.com/watch?v=EaJu23YZBpw

Regards
Neil

Funny, I've been experimenting with poor man's pseudo-DTMF using a cheap mechanical beeper as a speaker. Sounds a bit like your ringtone.

'b.1 beeper active low
do
low 1 'beeper on
pause 500
high 1 'beeper off
pause 500
tune 1, 4, %00000000,($00,$04,$07,$10,$07,$04,$00)
high 1 ' beeper off
pause 500
loop


https://www.youtube.com/watch?v=EF1-noeMqVI

tune 1, 4, %00000000,($6A,$6A,$2B,$6A,$6B,$01,$6B,$41,$03,$41 ,$6B,$2A,$6A,$6A,$EB)

Thanks Erco,
Ill give that ago, sounds near enough for my prop

Regards
Neil

A "laser" sound sequence played through the same mechanical beeper giving a complex sound. Here it loops through the fast "laser" sound, then the same 4 tones played slowly, then the beeper's pure tone powered by DC. Code shown onscreen, tiny beeper displayed. Beeper Ebay price is ~10 pcs for $1.50.

I had to use sound on pin 1 since tune only plays on an 08M2's pin 2, needed for PWM in this particular project.