HI
Im trying to set up a simple data logger using 08m2 and DS18b20
set up like this
https://picasaweb.google.com/113722269455296509901/InputCircuits#5135515315717431986
Using the code below sends the serial data(temp) back to programming editor ok
but when I connect thru parallax to excel I get "ERROR DATA<ASCII 10 or > ASCII 200" message.
can someone explain what that error message means
thanks
steve
main:
for b0 = 1 to 10
read b0, b1
wait 1
sertxd ("Data = ",#b0,9,#b1,13,10)
next b0
for b0 = 1 to 10
readtemp 1, b1
write b0,b1
wait 1
sertxd ("Data = ",#b0,9,#b1,13,10)
next b0
goto main
Im trying to set up a simple data logger using 08m2 and DS18b20
set up like this
https://picasaweb.google.com/113722269455296509901/InputCircuits#5135515315717431986
Using the code below sends the serial data(temp) back to programming editor ok
but when I connect thru parallax to excel I get "ERROR DATA<ASCII 10 or > ASCII 200" message.
can someone explain what that error message means
thanks
steve
main:
for b0 = 1 to 10
read b0, b1
wait 1
sertxd ("Data = ",#b0,9,#b1,13,10)
next b0
for b0 = 1 to 10
readtemp 1, b1
write b0,b1
wait 1
sertxd ("Data = ",#b0,9,#b1,13,10)
next b0
goto main