Problème Axe027

bzh56420

New Member
Capture du 2015-05-23 22:38:20.pngHello,

I'm new to the forum, I'm looking, but I can not find the answer,
I use Ubuntu 14.04, a 20m2 picaxe and usb cable Axe027, I followed the procedure and when I do view -> Options -> Firmware I get the message joins the discussion. I tried various methods but same result. Thank you for your help
Herve
 
Last edited:

bzh56420

New Member
when i go to /dev , I don't find ttyUSB0, my cable is an official axe, thank you for your help, I am à beginner abot Picaxe
 

bzh56420

New Member
I have many file tty....ttyS31Capture du 2015-05-25 00:10:06.png, apparently it's at the rule that there is a problem, when I make dmesg here is the result Capture du 2015-05-25 00:14:26.png
 

bzh56420

New Member
Resolved

I found the solution on this post: //forums.reprap.org/read.php 12.4546,
I load the driver: sudo modprobe usbserial vendor = 0x403 product = 0xbd90
and I modified the / etc / modules in which I added: usbserial vendor = 0x403 product = 0xbd90 and it works, now it remains for me to solve this problem, when I want to load a program into my 20M on a plate axe118 I have the answer: Hardware not found on dev / ttyUSB0!
Thanks for your help
 
Top