professor_jonny
New Member
am I able to use an input to read a binary switch and if the switch is not in any position have it switch to an output to drive to a specific set position depending on the preset selected the picaxe after power up after a set time ?
The problem I see if I have an output connected to an input it will be reading the status of the output of the picaxe which will be opened or closed via the program.
the other option could be if i'm able to tri state the output to floating during the read of the inputs on startup ?
The problem I see if I have an output connected to an input it will be reading the status of the output of the picaxe which will be opened or closed via the program.
the other option could be if i'm able to tri state the output to floating during the read of the inputs on startup ?