laserhawk64
Senior Member
Should work, haven't tested it yet... I'll be using it with a 14M2, at least initially.Built with what I had on hand. 7805, 100nF Chiclet caps, resistors, and perf from Radio Shack. 'Sink for the 7805 from eBay. Headphone jack from places unknown. The 20pin DIP socket started out as a 28p socket that a friend gave me; I cut it down with scissors (frighteningly effective). I'm all out of 10K resistors but I had an extra two 22K's and a 100K which (according to The Interwebs) was good enough in parallel... ~9.9K instead of 10K, I really don't think the chip will notice or care.I'll build a better one if I can get my hands on some ZIF DIP sockets... I know that the regular socket I'm using now will wear out pretty quickly. This was built for a time-sensitive project though, so I couldn't wait for cheap eBay sockets to arrive from China or Hong Kong. Should work OK for a while...Pix (huge, as links) -- (1) http://i.imgur.com/fbS7Jlf.jpg (2) http://i.imgur.com/9UoNInv.jpg (3) http://i.imgur.com/UbJKpk9.jpg (4) http://i.imgur.com/r54d0b8.jpg (5) http://i.imgur.com/aSnYjXe.jpg (6) http://i.imgur.com/D1iqhzu.jpg (7) http://i.imgur.com/P4GEq0M.jpg