lbenson
Senior Member
08M2, 14M2, 20M2 SIP boards with Eagle PCB files
Here are two single in-line pin boards I made for breadboard use. The PCB design is in Eagle CAD. I had them made up by Osh Park--3 boards each.
I've sent in a bundled design to iteadstudio which will provide 10 14sip boards and 20 08sip boards for about $20US including shipping--a dollar a board for the 14s, fifty cents for the 08s.
I tend to cut my 65-row breadboards into smaller pieces with a bandsaw. Many useful designs are possible with the 08sip and an 8-row breadboard.
For the eagle files attached below, remove the ".zip" extension to get the .sch and .brd files.
Additional 20M2 sip board in posts 8 & 9.
Here are two single in-line pin boards I made for breadboard use. The PCB design is in Eagle CAD. I had them made up by Osh Park--3 boards each.
I've sent in a bundled design to iteadstudio which will provide 10 14sip boards and 20 08sip boards for about $20US including shipping--a dollar a board for the 14s, fifty cents for the 08s.
I tend to cut my 65-row breadboards into smaller pieces with a bandsaw. Many useful designs are possible with the 08sip and an 8-row breadboard.
For the eagle files attached below, remove the ".zip" extension to get the .sch and .brd files.
Additional 20M2 sip board in posts 8 & 9.
Attachments
-
94 KB Views: 98
-
40.9 KB Views: 53
Last edited: