​ ​ ​ ​ 4 Motor Driver PCB with FRM050 + L293D
Results 1 to 3 of 3

Thread: 4 Motor Driver PCB with FRM050 + L293D

  1. #1
    New Member
    Join Date
    Mar 2009
    Location
    Athens
    Posts
    3

    Default 4 Motor Driver PCB with FRM050 + L293D

    Small PCB (49mm x 34mm) with all through-hole components. It drives four motors using two FRM050's and two L293D's. Motors connect to the green terminals, motor power connects to one blue terminal and logic power connects to the other. The pin header provides an alternate way for connecting logic power and two sets of four pins for control of the two pairs of motors. It also provides a way to plug the whole board into a solderless breadboard quite easily.

    Picture 1: The motor driver board attached to four motors and a 4-AA battery holder for motor power.
    IMG_0366_b.jpg

    Picture 2: Top side (left) and bottom side (right) of the PCB.
    IMG_0345_c.jpg

  2. #2

    Default 4 Motor Driver PCB with FRM050 + L293D

    Hi all, Does anyone know where I can buy this PCB 4 Motor Driver PCB with FRM050 + L293D please Brian.

  3. #3
    Moderator
    Join Date
    Mar 2008
    Location
    Western Australia
    Posts
    12,244

    Default

    That may well have been a self designed board by Orinoco.
    The FRM50 chip is a Rev Ed product: http://www.picaxe.com/docs/frm050.pdf

    Rev-add use it in their AXE023 motor driver board:
    http://www.picaxestore.com/index.php..._d/axe023.html

    Orinoco has only ever made 3 posts and not logged in since 2013 so highly unlikely will see your query.
    westaust55

    Hey Hamlet, 2B OR NOT 2B = $FF

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •