My new ERF boards, I can't get them to talk!! "NUBE alert!!,,enter at your own risk!"
Hi All
I have bought two ERF boards that arrived today!!. I have connected them to a power source and I have a heart beat on the LEDs. I have one 08m2 with this program
init: pause 500
main:
serout c.0,n2400,(254,1)
serout c.0,N2400,(254,134)
serout c.0,n2400,("hello world!")
pause 500
serout c.0,n2400,(254,192)
serout c.0,n2400,(253,1)
GOTO MAIN
end
I have the c.0 pin connected to the Rx on the first ERF board. The second ERF is connected via the Tx pin to the serial in pin on my OLED board that I have purchased. The OLED has a AXE133 board attached. I am able to connect the OLED board to my PICAXE directly to c.0 and I get the display "hello world", however as soon as I connect OLED to the 08m2 via the ERF modules, nothing happens. I have 2 heart beats and have connected the DTR led on both ERF boards. There is some flashing? but there is no dipslay on the OLED. Ie the serial data is not getting through.
Any help with this one would be great....I cant really find much literature about the ERFs except a PDF that mainly describes ERFs and PICAXE programming. ( RFA020.pdf and http://www.picaxe.com/docs/RFA021.pdf)
Thanks in advance..
Hi All
I have bought two ERF boards that arrived today!!. I have connected them to a power source and I have a heart beat on the LEDs. I have one 08m2 with this program
init: pause 500
main:
serout c.0,n2400,(254,1)
serout c.0,N2400,(254,134)
serout c.0,n2400,("hello world!")
pause 500
serout c.0,n2400,(254,192)
serout c.0,n2400,(253,1)
GOTO MAIN
end
I have the c.0 pin connected to the Rx on the first ERF board. The second ERF is connected via the Tx pin to the serial in pin on my OLED board that I have purchased. The OLED has a AXE133 board attached. I am able to connect the OLED board to my PICAXE directly to c.0 and I get the display "hello world", however as soon as I connect OLED to the 08m2 via the ERF modules, nothing happens. I have 2 heart beats and have connected the DTR led on both ERF boards. There is some flashing? but there is no dipslay on the OLED. Ie the serial data is not getting through.
Any help with this one would be great....I cant really find much literature about the ERFs except a PDF that mainly describes ERFs and PICAXE programming. ( RFA020.pdf and http://www.picaxe.com/docs/RFA021.pdf)
Thanks in advance..