Hi,
I have read the following information in a Post.
"From Picaxe manual 2, page 133
“When using the debug command to output 10 bit numbers, the electrical
connection to the computer via the serial download cable may slightly affect the ADC values. In this case it is recommended that the ‘enhanced’ interface circuit is used on a serial connection (cable AXE026, not required with USB cable AXE027 as this uses 5V logic anyway). The Schottky diode within this circuit reduces this affect.”
Also refer to manual 1 p.37."
I have read From Picaxe manual 2, page 133 and manual 1 p.37. I do not understand the term ‘enhanced’ interface circuit is used on a serial connection.
I do not seem to see any information on ‘enhanced’ interface circuit is used on a serial connection. What am I missing, is it as plain as the Serial Download Circuit on page 37 of manual 1 and its diagrams.
Assistance on this matter would be greatly appreciated.
Thanks Spirobot
I have read the following information in a Post.
"From Picaxe manual 2, page 133
“When using the debug command to output 10 bit numbers, the electrical
connection to the computer via the serial download cable may slightly affect the ADC values. In this case it is recommended that the ‘enhanced’ interface circuit is used on a serial connection (cable AXE026, not required with USB cable AXE027 as this uses 5V logic anyway). The Schottky diode within this circuit reduces this affect.”
Also refer to manual 1 p.37."
I have read From Picaxe manual 2, page 133 and manual 1 p.37. I do not understand the term ‘enhanced’ interface circuit is used on a serial connection.
I do not seem to see any information on ‘enhanced’ interface circuit is used on a serial connection. What am I missing, is it as plain as the Serial Download Circuit on page 37 of manual 1 and its diagrams.
Assistance on this matter would be greatly appreciated.
Thanks Spirobot