Search results

Any one know if the Axe133y can handle multiple byte hardware serial out. Or only multiple byte Serout like the AXE033 module?. Ive figured out an 18m2 using SERIN wont be able to keep up with a multiple byte HSEROUT.

I am working on a 20x2 PWM based 12V SLA battery charger. I have a FQP27p06 P chan mosfet connected with the source to the 10w solar panel positive. the Drain connected to the Load/battery positive via a blocking diode. The gate is connected via a 100 ohm resistor to the collector of a PN100...

I have noticed that the 20x2 Readtemp12 comand displays 0 if the temperature is 0 or if the Ds18B20 is disconected On my setup if a DS18B20 returns 0 ive set up a subroutine to Readownsn on that DS18B20 to check that it actualy still alive. As i now need to use W3,W4,W5 is there a way to use...

:confused: Ive just upgraded a 18m2 circuit to a 20X2. the circuit has 3 Dallas DS18B20 temp sensors . 1 DS18B20 is on the end of 15 meters of twin wire, shielded microphone cable, the other are on approx 8 meters of sheilded microphone cable. The 18m2 Readtemp12 comand works perfectly on all...

Ive got a SparkFun 20x4 backlit serial enabled LCD. I cant seem to get the comand right to change the default ,9600 baud rate to 4800. this is to allow a 18m2 to run at 4mhz and serout at t4800. The command serout b.5, t9600_8,(254,124,128) turns the back light off ok. The documentation says...

I am using a 18m2 , to control a home ventilation system. I use pin C.5 with a 10k ohm pullup resistor as the on/off button. When the relay that switches the 240V fan between hi and low switches the 18m2 resets itself. The PICAxe manual states that this pin is no longer the reset pin. A 10uF...