Search results

Hi,i have made a project with an IR receiver and transmitter and an o8m everytime one of my family change channels with a tv remote it switches off my project which is irratating when i think my project has gone wrong i know the infrain2 will respond to the sony IR protocol which most tv remotes...

Hi, ive built a 08m project board with a IR receiver and a LED i tried using a 3v button battery but it wasn't strong enough to allow the receiver to do its job,unfortunately i cant find a 4.5v battery unless i put a 3v and a 1.5 together,is it possible to get battery holders that will allow the...

Hi,ive built a project on a 08 project board,i built a circuit for a flashing LED, I connected a 3v button cell to power it,but when i connected an IR receiver to the circuit the 3v battery will no longer power the project i've got 3 AA LR6 1.5 EACH which gives me 4.5 which will power the...

Hi does anyone know of a fade command programme for the 08,IC so i could experiment with a few LEDs instead of making the LEDs flash i would like to try and make them fade in and out.thanx

HI,Hippy. hows it going? i dont think i tried your programme,ive just found it on a print off i did ,will try now. what im trying to do is get a IR receiver and transmitter to allow a LED to flash continuos when the transmitter is pressed once and then for the LED to go off (stop flashing)i...

Hi, Phil75.I tried the last programme you sent me on the 16 April,the programme did exactly the same as the last programme which lets the LED come on once the transmitter is pressed once and to go off once depressed again and yes the LED will flash if the transmitter button is kept pressed...

Hi phil75. sorry to keep bothering you,i have tried your programme that you sent me but i'm experiencing the same results which is when press the transmitter is pressed once the LED will come on(not flashing intermitantly)and when i press the transmitter again the LED will go off but if i keep...

Hi,pbunyan & Phil75. i tried the programmes for the infraout and infrain codes,whats happening is that the transmitter will switch the LED on and if i press the transmitter again the LED will go off,if i keep the transmitter button pressed in the LED will flash which is not quite what im...

thanks for your suggestions i will put them into practise and let you know the outcome. CHEERS !

ive downloaded this programme to start on my 08m project board,nothing seems to be happening just wandering if its my transmitter IR programme.ill give you both transmitter and receiver programmes. transmitter main: if pin1 = 1 then tx_1 goto main tx_1: let b1 = 1 goto tx_ir...

is there anyone i could discuss my project with who lives in the west midlands area,im just getting started with electronics and very much a novice but ive started a project which i have an IR transmitter and a receiver with an LED conected i can manage to programme the reciever and transmitter...

I was wondering about the programme im trying to develope,i have put together a IR transmitter using the transmitter board from the rudolph project and then a 08 project board both have the 08m microprocessors.what i would like to acheive is to get the project board with an LED connected to...

Hi,could anyone look at this programme and help me find a code that will allow me to keep the LED flashing until triggered to stop by my IR transmitter.when triggerred the programme will run then stop instead of repeating the programme. ReceiverLoop: debug b1 INFRAIN2 pause 1000 high 4 pause...

Hi, i've been trying to get a transmitter circuit to trigger a receiver to make an LED flash continously until i trigger the transmitter to stop the receiver from flashing the LED,can anyone help.thanx

Hi,ylp88,ive been trying to solve the code command you gave me for the trigger command but still keep comming up with the same outcome i think im still getting the trigger commands wrong,any more clues ?

Hi, i have managed to connect a IR and a LED onto a 08 board so i could use a transmitter to get the LED to flash,but what i didnt realise is that in the commands there is not a command that will allow me to switch the led off and on, on command at the moment when i point the transmitter...

Hi,at the moment im trying to use the 08 project board to experiment with, im trying to figure out how to connect a IR to the board i know pin one on the IR has to go to the input pin 3 on the picaxe 08M,not sure where the remaining two pins on the IR will go to complete the circuit.is the 08...

hi,im looking for a basic programme to use with a 08 board where i could practise using a infrared transmitter and a reciever on a 08 board with a 08M chip so i can programme this to just blink on command are there any programmes i could try ?thanx

Hi,question, is it possible to put an infrared reciever on a 08 board or would i need to use a 08M microcontroller on the 08 board?

Hi,ive playing around with the 08 picaxe board,does anyone know a programme where i can fade a LED light rather than have a programme where the LED blinks on and off.thanx