Hi there,
to all who may be interested, i've discovered a way to use a SD card for datalogging with a picaxe and then view that info on a pc with a card reader.
what you do is make a few text files on a fat16 formatted sd card, and then
use a hex editor to open the card and change data.
first...
hi all,
after bitbanging i2c on an 08m i was wondering how tricky comms with the usb port is? (with all the proper drivers etc..)
and is clock frequency an issue?
thanks.
hi all,
im working on an accelerometer project, but when i read the voltage on the y pin with a multimeter i get 1.6 (half supply voltage). when i read it with adc10
i always get 8.(other channels are fine).
is it possible that by soldering it i damaged the picaxe?
has anyone had similar...
hi all,
i would just like to know if it's possible to interface an external eeprom chip to a
picaxe 08m.
i was thinking shiftout/in but i read somewhere that you have to use pulsout to send data manually. is this true for m series? can you make a datalogger out of a 08m?
thanks.
hi all,
i tend to build projects quite quickly, and sometimes dont think things through...
i would just like to know if connecting a ds18b20 temp sensor
with reverse polarity will kill it?
reason i ask... is 'cause i did, and i cant test it.
thanks all.
hi, all.
im having a weird problem trying to control some leds.
if i say:
high 1
pause 1000
low 1
pause 1000
high 2
etc...
pin 1 doesn't turn off when the code hits low 1. it turns off when pin2 is supposed to go low! pin 2 only turns off when 4 goes low etc...
all other commands work fine...