I have a problem with a very simple program which demonstrates a problem with the pause command when interrupts are being used.
The first 3 lines enable a timer interrupt to be generated every 10ms (100Hz)
The main loop flashes a LED on and off every two seconds
The interrupt handler pulses...
I’ve been experimenting driving a bipolar stepper motor for a robotics project I’m working on. I am using an Alegro A3980 translator/driver chip. This is a very simple device that only requires a step pulse and direction as well as a few discrete components.For my application I need to be...
I've been struggling to get the timer interrupt working on the 28-x1 chip.
This is the code I have used:
settimer t1s_4
setintflags %10000000,%10000000 ‘ enable timer interrupt
main: pause 1000 ‘ wait 1 seconds
high 0 ‘ Turn LED on
pause 1000 ‘ Wait 1 second...