Recent content by iz3kxw

Hi guys, here we are with a new question, I'm working to a new project, but before start to do something i must clarify a few things. The project plans to read with a 14M2 picaxe the serial out of the main board of my car, and after processed the data show the value on a lcd display. The car is...

Hi, may be you heard many times this question, but unfortunally for me is not completely clear. As the manual say, our pic have: Memory program 2048 bytes Ram 521 bytes (28 bytes variable and 483 bytes for storage)...

Hi, tonight i solved my issues, as you wrote it was my mistake, i confused T and N command, if you see now i modified the hardware (pin3 and pin5 of DB9 plug) and also the code, but, work well only at 32Mhz, if i set a lower freq. sometimes the values received are incorrect. One more thing, if i...

this is my circuit ft847 is equipped with a 232 converter, so i inverted the signals by 2 optocoupler, i think my connection polarity is working well because the rig receive the command by 14M2. Is the 14M2 that don't receive the right data from the rig. I would like to try to analyze the...

Hi guys, Does anybody know the maximum negative current of an input of a Picaxe 08M2 ? I mean to connect for example a diode led anode to supply (5 Vdc), the cathode to a resistor and than to the input of my Picaxe and light up the led when the input pin is in low condition. I know the maximum...

Good afternoon, i introduce myself, my name is Andrea and i’m writing from Italy. I’m a newbie with the Picaxe and I need some information regarding my project. By a Picaxe 08M2 i have to control a Yaesu FT847 rigs with own serial protocol. Each instruction to send the radio consist of 5...