​ ​ ​ PICAXE Forum - Recent Blogs Posts - Blogs
View RSS Feed

Recent Blogs Posts

  1. Download to PICAXE 40X2 issuees...

    Hello everybody,
    I have an issue to download on PICAXE-40X2 (PIC18F45K22) fit in the RKP40c board.
    I soldered the pairs (2 + 2) from download connector as in documentation but still is not working.
    Message <Com x not found>.
    Using same cable and different circuits and boards: PCB 08M, 14M, 20M, 28X2 (3V) download was succesfuly...
    Can somebody suggest additional checking's ?
    Thank you
  2. How to Post a trigger event to IFTTT using ESP and PICAXE 08M2

    I currently post values to Thingspeak using a Picaxe 08M2 and ESP 0866 and would like to do the same to IFTTT but the same code does not appear to work. Can anyone offer assistance?

    Thanks

    Dave
  3. OPL-Transmitter.C

    Code:
    /* RASPBERRY PI One-Page LoRa TRANSMITTER
    *
    *  AI Ra-01_V1.0 Semtech SX1278
    *
    *  LoRa            Pi
    *  3.3V         3.3V    Red
    *  GND            GND        Black
    *  SCK            SCLK    Yellow
    *  MOSI            MOSI    Green
    *  MISO            MISO    Orange
    *  NSS            CE0    White
    *  RESET        #18    Brown
    *  DIO0    ------1k------- #24    Grey IRQ pulled down + 1k current limiter
    *  Pi3.3V--button--1k-->
    ...
    Categories
    Uncategorized
  4. OPL-Transmitter.ino

    Code:
    /* ARDUINO One-Page LoRa TRANSMITTER 
     *  
     * AI Ra-01_V1.0 Semtech SX1278 ****** NOT BREADBOARD FRIENDLY !!!! ******
     *
     * Powered from computer usb or phone charger via FTDI module with jumper at 3.3V 
     *
     *  LoRa       Arduino
     *  3.3V        VCC       THREE POINT THREE VOLTS !!!.!!!       
     *  GND         GND
     *  SCK         SCK       (13)
     *  MISO        MISO      (12)
     *  MOSI        MOSI      (11)
     *  NSS         10
    ...
    Categories
    Uncategorized
  5. OPL-Receiver.bas

    Code:
    #PICAXE 20X2       'One-Page-LoRa-Receiver.bas
    #TERMINAL 9600
    #no_data
    #no_table
    
    'AI LoRa module Ra-01_V1.0  Semtech SX1278. NOT BREADBOARD FRIENDLY !!!!!
    'Power supply: 3.3V from computer USB via FTDI module 
    '
    'LoRa       Colour       Picaxe    
    ''''''''''''''''''''''''''''''''''''''''''''''''
    'RESET     Brown        B.6    
    '3.3V       Red             +V         THREE point THREE VOLTS !!!.!!!    
    'GND       Black
    ...
    Categories
    Uncategorized
Page 1 of 34 1 2 3 11 ... LastLast