​ ​ ​ PICAXE Forum - Recent Blogs Posts - Blogs
View RSS Feed

Recent Blogs Posts

  1. nrf24 Transmitter (bis)

    Code:
    /* ARDUINO TRANSMITTER
     *  
     * Arduino Pro Mini 328 5V/16MHz 
     * Power supply:3.3V from computer USB or phone charger, via FTDI.
     *  
     * NRF                  Arduino
     * Pin      Colour        Pin
     * 1        Black         GND
     * 2        Red           3.3V      THREE POINT THREE !!!.!!!
     * 3        Brown         7         CE
     * 4        White         10        CSN
     * 5        Yellow        13        SCK
     * 6        Green
    ...
    Categories
    Uncategorized
  2. nrf24 Receiver (ter)

    Code:
    'RECEIVER          (nrf24_Receiver.bas)
    
    'Power supply: 3.3V from computer USB or phone charger via FTDI =
    'no 5V, phantom or otherwise, to fry nrf
    'Inverter levels RX /  TX : 74HCT04
    
    '1 GND    Black     GND
    '2 VCC    Red        VCC     THREE point THREE volts !!!.!!!
    '3 CE      Brown     B.1
    '4 CSN    White     B.6
    '5 SCK    Yellow    B.7
    '6 MOSI   Green    SDO C.1
    '7 MISO   Orange  SDI B.5
    '8 INT      Grey      C.5
    ...

    Updated 12-11-2017 at 08:19 by kfjl

    Categories
    Uncategorized
  3. nrf24 Receiver (bis)

    Code:
    /* ARDUINO RECEIVER
     *  
     * Arduino Pro Mini 328 5V/16MHz 
     * Power supply:3.3V from computer USB via FTDI. 
     *  
     * NRF                  Arduino
     * Pin      Colour        Pin
     * 1        Black         GND
     * 2        Red           3.3V      THREE POINT THREE !!!.!!!
     * 3        Brown         7         CE
     * 4        White         10        CSN
     * 5        Yellow        13        SCK
     * 6        Green         11        MOSI
    ...
    Categories
    Uncategorized
  4. nrf24 Receiver

    Code:
    /* PI RECEIVER
     *
     * PiB+ or Pi2 (with bcm2836)
     * Power supply : Anything that gives you 5V and 1 Amp or more
     * Pin numbering system : Broadcom
     * Requires the bcm2835 library, available here: 
     * http://www.airspayce.com/mikem/bcm2835/bcm2835-1.52.tar.gz
     * Follow the instructions to install and use it here:
     * http://www.airspayce.com/mikem/bcm2835/
     *
     * NRF    Pi    FUNC    COLOUR
     * ****************************
     * 1
    ...
    Categories
    Uncategorized
  5. nrf24 Transmitter

    Code:
    'TRANSMITTER   (nrf24_Transmitter.bas)
    
    'Power supply: 3.3V from computer USB or phone charger via FTDI =
    'no 5V, phantom or otherwise, to fry nrf
    'Inverter levels RX / TX : 74HCT04
    
    'nrf24                      20X2
    ************************
    '1 GND     Black       GND
    '2 VCC      Red          VCC     THREE point THREE volts !!!.!!! 
    '3 CE         Brown     B.1
    '4 CSN      White       B.6
    '5 SCK      Yellow       B.7
    '6
    ...

    Updated 12-11-2017 at 08:23 by kfjl

    Categories
    Uncategorized
Page 1 of 31 1 2 3 11 ... LastLast