​ ​ ​ PICAXE Forum - Recent Blogs Posts - Blogs
View RSS Feed

Recent Blogs Posts

  1. how can i apply hsersetup command to have serial comm at 56000baud

    Quote Originally Posted by paco556 View Post
    I read hsersetup can set non common value to communicate via rs232 in this case device is at 56000bauds how can i make the command line with the number it needs to set this baud rate?
    I read that at clock on picaxe device running 32mhz needs a number I made the math and gives me a 141 number how can I use it and how the command line looks like?
    I use:
    hsersetup b141_8, %11
    But compiler is saying there is a syntax error.
    I want to ecco the 56000 baud from the
  2. 'Coke Can' RC car conversion

    Prompted by edmund's miniature line follower ( http://www.picaxeforum.co.uk/showthr...r-final-strech) , I've started one of my own.

    Not being in possession of the requisite tools ( i.e skills and patience ) for building a miniature vehicle, I bought one ready built.

    Click image for larger version. 

Name:	CokeCanRC.jpg 
Views:	109 
Size:	69.3 KB 
ID:	20808

    With the body off it looks like this. ( USB for size comparison )

    Click image for larger version. 

Name:	Raw car.jpg 
Views:	129 
Size:	100.9 KB 
ID:	20809
  3. Mouse encoders

    Quote Originally Posted by JAM1959 View Post
    I will only log suspension movement up and down,2 front pots and 1 rear as rear suspension runs a monoshock system.I will only log for one lap to start off with.Then I can come home pull suspension down to that point and see what happens with wheel aligment angles...I wud also like a 360 deg pot on steering shaft to measure steering angle.Hope that makes senses.Take baby steps......first
  4. LinAXEpad / axe027 ubuntu 16.04 AMD64 or 14.04 AMD64 installations

    Ubuntu 14.04 or 16.04 AMD64
    //setup install :
    // lib gtk2 32 bits

    terminal : root
    sudo su
    : password . . . .

    apt-get update
    apt-get install libgtk2.0-0:i386 libcairo2:i386 libpango1.0-0:i386 libgdk-pixbuf2.0-0:i386 libstdc++6:i386
    apt-get update

    //setup install
    // Cable Axe027
    write file named without ext (gedit)
    contains ...
  5. 2.0 sp035 kit pcb / ciruit diagram

    Quote Originally Posted by 3142ron View Post
    They supplied all the info for Project AXE002 18M2 STARTER PACK, Board Layout and Schematic Diagram.... In the manual it says diagram to follow.....
Page 1 of 31 1 2 3 11 ... LastLast