net01 lost setup

TONYMORAGA

New Member
Hi

I ve bought a net01.
I ve the following problem. When I powered down the card it lost the configuration settings, and I have to download the settings again.
Each time I powered down the card it display "Set up .........." .
Tell me how can I fix this problem.
Best regards.

Tony.
 

Technical

Technical Support
Staff member
Sounds like the 'mode' switch is stuck on. Check the connections of any input/output board.
 
I've been having trouble with the PNS randomly starting up with "Setup" when I have an external Picaxe attached to it. In particular, loading a new program into the Picaxe would make the PNS stop serving web pages and/or go to Setup.
After examining my "mode" switch, I found that jumper J1 wasn't connected. This apparently "enables the 100k pull up on pin 7, which is the mode switch". Putting the jumper in place makes the Setup problem go away. So I guess my mode switch was floating and that caused the random effects.
So I guess that's something worth checking for if you get similar problems.
Meanwhile, anyone know why you wouldn't want the mode switch pulled up??
Cheers
Simon
 
Top